The so-called Toyota car rubber bumper mainly refers to a device that has the effect of limiting the maximum deformation of the suspension in the car. Toyota's rubber bumpers effectively reduce the direct impact of the axle on the frame (or body) and prevent excessive deformation of the elastic components. Toyota rubber cushions are mainly composed of rubber blocks, steel plates and bolts.
We know that Toyota rubber bumpers are rubber products. Usually, such a product tends to be pressed by a large pressure during molding, and the cohesive force which is prepared by the elastic body cannot be eliminated, and the extremely unstable shrinkage is often generated when the mold is released. Moreover, the shrinkage rate of rubber varies depending on the type of rubber.
In response to this problem, it usually takes a while to stabilize and stabilize. Therefore, at the beginning of the design of Toyota rubber cushions, we are very careful in calculating the fit whether it is a formula or a mold. Only in this way can we ensure that the Toyota rubber bumper is stable in size and meets the requirements for use.