Replacement steps after shock absorber bumper Toyota is damaged

- Feb 25, 2019-

During the driving process, if the shock absorber bumper Toyota is damaged, it needs to be replaced in time. When replacing, first remove the cover and remove the buckles, screws and bolts that fix the Toyota shock absorber bumper. The Toyota shock absorber bumper is pulled after the wheel arch area is pulled to release the rear bumper from the hook of the side partition.
 
When the wheel arch portion is then pulled out of the side septum, the rear Toyota shock absorber bumper is pulled to release the bumper from the hook of the side bracket. Pull the rear bumper to release the bumper from the hook on the upper bracket. Pull the shock absorber and remove the rear bumper absorber from the rear bumper beam to loosen the protruding parts on both sides.
 
Finally, install the Toyota shock absorber bumper in the reverse order of disassembly. It is important to note that the rear bumper is securely engaged with the hooks on both sides during installation. If the buckle is damaged, replace it with a new one; push the buckle and hook firmly to secure it in place.

https://www.huipuautoparts.com/