Shock absorber bumper Honda inspection method

- Nov 08, 2018-

Shock absorber bumper Honda is part of the shock absorber assembly system and is a fragile accessory in the car's use. If the shock absorber oil leakage, rubber damage, etc. will directly affect the smoothness of the car and the life of other parts, we need to keep the shock absorber in good working condition.


When performing performance check on the shock absorber bumper Honda, the car can be driven for 10 kilometers on the road with poor road conditions. After parking, touch the shock absorber casing by hand. If it is not hot enough, the shock absorber There is no resistance inside and the shock absorber does not work. The shock absorber needs to be replaced at this time.


Next, press the shock absorber bumper Honda and then release it. If the car produces 2 or 3 jumps, it means the shock absorber is in good condition. If the shock absorber is found to be abnormal, remove the shock absorber and erect it, and clamp the lower end connecting ring to the vise. Pull the damping rod several times. At this time, there should be stable resistance. Pull up. The resistance should be greater than the resistance when pressing down. If the resistance is unstable or there is no resistance, it may be that the inside of the shock absorber is short of oil or the valve parts are damaged. It is necessary to repair or replace the parts.