Shock Absorber Bumper Honda replacement standard

- Mar 14, 2019-

In fact, the Shock Absorber Bumper Honda did not say that it should be replaced on time or according to the number of kilometers. It mainly depends on the use situation. Every maintenance reminds the workers. Once the elastic capacity is found to decrease, it can be replaced at that time. The safety of the bumper Honda's work directly affects the stability of the car during driving and the life of several other pieces, so we should make the shock absorber bumper Honda in good working condition.


After the car is driven for 10km on the road with poor road conditions, stop and touch the damper shell by hand. If it is not hot enough, there is no resistance inside the damper and the damper does not work. At this time, the appropriate lubricating oil can be added, and then the test is carried out. If the outer casing is heated, the inside of the damper is lacking in oil, and sufficient oil should be added; otherwise, the damper fails.


Press the bumper bumper Honda hard and release it. If the car has 2-3 jumps, the shock absorber works well. When the car is driving slowly and braking urgently, if the car vibration is severe, the damper has a problem.


Remove the damper and erect it, and clamp the lower end connecting ring on the vise. Pull the damper rod several times. At this time, there should be stable resistance. The resistance to pull up (recover) should be greater than the downward pressure. The resistance at the time, such as unstable or no resistance, may be due to lack of oil inside the damper or damage to the valve parts. Repair or replacement of parts should be performed.