Suspension rubber buffer front axle selection requirements

- Dec 27, 2018-

The suspension rubber buffer front axle not only has clear requirements for its shape design, but also has many specific requirements for the material selected. First of all, it should be confirmed whether the material of the skeleton and the heat treatment method are clear, whether the strength requirement of the skeleton is clear, and whether the rubber material is clear.

 

Secondly, it is necessary to consider the specific performance requirements for the materials used for the suspension rubber buffer front axle, mainly based on factors such as the use of the relevant components, the size and installation conditions are clear. In addition, it should be considered whether the range of measurement conditions of dynamic and static stiffness is clear; whether the tolerance range of dynamic and static stiffness is reasonable.

 

If the suspension rubber buffer front axle has stiffness requirements in all directions, it is necessary to clarify a main direction, and the main direction stiffness should be clearly defined, and the other direction stiffness tolerance should be relaxed; the endurance test conditions are clear (including direction, load) /displacement, frequency, endurance, etc.). In addition, it should be confirmed whether the capabilities of the existing test equipment are met.

 

https://www.huipuautoparts.com/